湿法磷酸净化脱砷的研究现状

随着食品、医药及电子行业的不断发展，磷酸及磷酸盐的市场需求量不断增大，并且对磷酸的品质要求也越来越高，尤其是对湿法磷酸中砷杂质的要求，湿法磷酸中砷的含量将直接影响其在磷精细化工领域的应用，因此湿法磷酸中砷的高效、安全去除是亟待解决的一大难题。本文主要对湿法净化磷酸脱砷技术的研究情况进行综述，比较了几种湿法净化磷酸脱砷工艺的优缺点，介绍了较常见的化学沉淀法、结晶法，以及新兴的电沉积法、垂直区域熔融法和微反应器脱砷工艺的应用前景，并指出这些新兴的脱砷工艺将成为今后湿法磷酸的净化脱砷的发展方向，如能解决将这些脱砷工艺在实际中的问题，将会对磷酸工业的发展提供一个更有力的支持。     

一种复杂产品总装工艺流程设计方法研究

围绕复杂产品总装工艺流程设计问题,从装配技术和企业经营管理的角度提出复杂产品总装工艺流程设计不仅是技术上的最优化,还应综合引入开工面限制、人力资源平衡、生产节拍需求以及投入产出比等因素,寻求技术与经营管理的平衡。提出了一种复杂产品总装工艺流程设计总体方案,设计了该方案的实现思路,并通过某型飞机总装工艺流程设计项目验证了方法的可行性和有效性。     

考虑围岩稳定性评价的引水隧洞施工过程仿真系统

根据施工过程中的围岩稳定情况确定出合理的施工进尺并实时可视化评价结构安全状况具有重要的工程意义。首先利用BIM建模软件建立三维基础模型,通过对建模软件进行二次开发并结合系统仿真原理得到引水隧洞施工进度;其次将几何模型转换为数值计算模型并建立进度数据库与引水隧洞数值模型之间的映射关系,通过有限元分析围压系统的安全状况,根据不同进尺下的进度计算及围岩稳定分析结果,合理选择施工进尺;最后基于Python+VB.net混合编程技术编制了引水隧洞施工进度与围岩稳定安全仿真系统。工程应用表明,该系统将隧洞施工进度、支护体系与围岩稳定性进行结合,可为合理制定施工计划及施工现场控制提供可视化技术及数据支持。     

Design of a thermal management system for a battery pack in an electric vehicle using Dymola

As the world moves toward more green and efficient means of modes of transport, electric vehicles are the most suitable and ideal choice to fulfill this requirement. Rapid developments in the field of battery technology are the main reason for their progress, but thermal management in such systems has been an area of concern for a long time. The work undertaken is to design and develop a battery management system (BMS) with a specific focus on the thermal behavior of the battery pack with varying vehicle loads as well as environmental conditions. To design an efficient BMS, one needs to model the battery behavior covering the thermal as well as electrical aspects of the battery. Apart from the battery model, a mathematical model of the electrical vehicle to mimic the various road load conditions for battery also needs to be modeled. Depending on the need for cooling based on battery behavior, the cooling circuit is modeled for the battery pack used. The entire study has been carried out using Dymola, a mathematical modeling software.     

Thermal Management Enables Bright and Stable Perovskite Light-Emitting Diodes

The performance of lead-halide perovskite light-emitting diodes (LEDs) has increased rapidly in recent years. However, most reports feature devices operated at relatively small current densities (<500 mA cm⁻²) with moderate radiance (<400 W sr⁻¹ m⁻²). Here, Joule heating and inefficient thermal dissipation are shown to be major obstacles toward high radiance and long lifetime. Several thermal management strategies are proposed in this work, such as doping charge-transport layers, optimizing device geometry, and attaching heat spreaders and sinks. Combining these strategies, high-performance perovskite LEDs are demonstrated with maximum radiance of 2555 W sr⁻¹ m⁻², peak external quantum efficiency (EQE) of 17%, considerably reduced EQE roll-off (EQE > 10% to current densities as high as 2000 mA cm⁻²), and tenfold increase in operational lifetime (when driven at 100 mA cm⁻²). Furthermore, with proper thermal management, a maximum current density of 2.5 kA cm⁻² and an EQE of ≈1% at 1 kA cm⁻² are shown using electrical pulses, which represents an important milestone toward electrically driven perovskite lasers.     

A flexible air separation process: 1. Design and steady-state optimizations

The flexible operation of energy-intensive processes, such as cryogenic air separation, has economic potential due to increasing fluctuations of the electricity markets. Multiproduct air separation processes with high ratios of liquid product are very promising for flexible operation due to storable products. We present a process design with an integrated liquefication cycle and liquid assist operation, that facilitates a high liquid product ratio and a flexible process operation. We use a mechanistic dynamic process model in steady-state process optimizations covering the wide operational range of the proposed process. The optimization results show that the power demand can be varied in a range from 3.5 to 28 MW without violating operational constraints by changing the nitrogen and oxygen production rates. Thus, the proposed process is a promising air separation candidate for flexible operation with respect to fluctuating electricity markets.     

OPM3要素对项目组合管理能力影响的SD建模与仿真

根据组织项目管理成熟度模型（OPM3），确定影响项目组合管理能力的OPM3要素，分析OPM3要素与项目组合管理能力的因果关系，构建系统动力学模型，仿真模拟OPM3要素对项目组合管理能力的影响。仿真结果表明：OPM3要素与项目组合管理能力正相关；OPM3要素对项目组合管理能力的影响在短期内并不显著；在OPM3要素中，对项目组合管理能力影响较为显著的是战略执行与规划、组织领导能力和信息分析。     

Recent activities in the field of Nuclear Operational Management and Nuclear Safety Engineering

Recent activities in the field of Nuclear Operational Management and Nuclear Safety Engineering, the studies related to risk analysis methodology, design, and operational management, physical phenomena, and emergency preparedness and nuclear security, have been progressed. Especially, ‘risk analysis methodology’ and ‘design and operational management’ are the main categories of the field, in which more than half of published articles on Journal of Nuclear Science and Technology are related to these categories.     

Development and validation of a crisis self‐efficacy index

This study develops a crisis self‐efficacy index to provide a tool for crisis communication researchers and practitioners to understand behavioural aspects of crisis response better. Evaluations of public's crisis self‐efficacy using this index inform strategic message development to protect the public and minimize crisis damages by identifying the public/s most in need of self‐efficacy enhancing interventions. The index also provides practitioners a useful longitudinal index to evaluate progress in crisis preparedness programs and track changes in efficacy. A four‐stage survey index development process using structural equation modelling identifies four underlying constructs of crisis self‐efficacy: action, preventive, achievement and uncertainty management.     

Microneedles for transdermal drug delivery: a systematic review

Transdermal route has been explored for various agents due to its advantage of bypassing the first pass effect and sustained release of drug. Due to strong barrier properties of the skin, mainly stratum corneum (SC), the delivery of many therapeutic agents across the skin has become challenging. Few drugs with specific physicochemical properties (molecular weight <500?Da, adequate lipophilicity, and low melting point) can be effectively administered via transdermal route. However, delivery of hydrophilic drugs and macromolecular agents including peptides, DNA and small interfering RNA is challenging. Drug penetration through the SC may involve bypass or reversible disruption of SC layer by various means. Recently, the use of micron-scale needles has been proposed in increasing skin permeability and shown to dramatically increase permeation, especially for macromolecules. Microneedles (MNs) can penetrate through the SC layer of the skin into the viable epidermis, avoiding contact with nerve fibers and blood vessels that reside primarily in the dermal layer. This review summarizes the types of MNs and fabrication techniques of different types of MNs. The safety aspects of the materials used for fabrication have been discussed in detail. Biological applications and relevant phase III clinical trials are also highlighted.